Specializing in the design and manufacture of automotive motor armatures and stators.

EN

The function of an automotive armature

Release Time:

2022-08-05

   Automotive Armature It is the component that plays a core and pivotal role in the process of mutual transformation between mechanical energy and electrical energy in a motor. For a generator, it is the component that generates electromotive force, such as the stator and rotor of a DC generator and the stator of an AC generator. For a motor, it is the component that generates electromagnetic force, such as the stator and rotor of a DC motor.

  The automotive armature is the component on the motor that has coils, and the coils are in relative motion to the magnetic field. In a generator, the rotating coils under force generate induced electromotive force, thus generating electricity. For a motor, the electrical coils are subjected to Ampere's force in the magnetic field, causing them to rotate in the magnetic field.

  In most generators, the field magnet is part of the rotating element, and the armature is stationary, part of the stator. Motors and generators can be composed of a stationary armature and a rotating magnetic field or a rotating armature and a stationary magnetic field. Permanent magnets or the polarized parts of electromagnets and the moving iron parts of solenoids (especially when the latter are used as switches or relays) can also be considered armatures.

  Composition of Automotive Armature:

  Automotive armature windings are divided into two major categories: DC armature windings and AC armature windings. They are used in DC motors and AC motors respectively.

  The automotive armature consists of an armature core and armature windings. The armature windings are the circuit part of the DC motor, and are the part that converts electrical energy by generating induced electromotive force and electromagnetic torque (for generators, it is the part that converts mechanical energy into electrical energy). The armature core is part of the armature circuit and also supports the armature windings, which are embedded in the slots of the armature core.

  1. The induced armature principle of DC and AC motors is roughly the same. The current in the DC motor armature winding is also AC, and it needs to be rectified by the commutator to output DC.

  2. AC motors are divided into induction motors (asynchronous motors) and synchronous motors. Induction motors are divided into squirrel-cage rotors and wound rotors according to their stator and rotor structure. Induction motors use stator windings to form a magnetic field, and rotor windings to convert electrical energy.

  3. Synchronous motors use stator and rotor windings to form a magnetic field, and stator windings to convert electrical energy.

  The armature usually refers to the part of the motor that requires an external power supply. The armature of a DC motor is the rotor, and the armature of an AC motor is the stator.

  Role of Automotive Armature in DC Motors:

  In a DC motor, the armature is the part of the rotor with wires, which can achieve the mutual transformation of mechanical energy and electrical energy. In a DC motor, the input DC power supply and armature windings can be subjected to Ampere's force in the magnetic field, forming a driving torque to drive the load to operate, converting the input DC power supply into output mechanical energy.

  In a DC generator, driven by a prime mover, the armature windings cut the magnetic flux lines in the magnetic field, forming an induced electromotive force. According to the rectification effect of the brushes, the input mechanical energy is converted into output DC energy.


Automotive armature

03-13

2023

How to properly test a starter armature? Maintenance tips for starter armatures

The starter armature is a key component in the process of converting battery energy into mechanical energy during car starting. It consists of numerous small parts. Due to its complex structure and working environment, its maintenance is relatively complex and requires correct detection to ensure its normal operation and long lifespan. I. Correct methods for detecting the starter armature 1. Check the appearance of the starter armature to ensure that its rotating parts are not worn or deformed, the cable connectors are not damaged, the terminals are not discolored, the armature insulator is not damaged, and there is no abnormal temperature rise in the armature body. 2. Use a professional testing instrument to check its internal circuit to ensure that its resistance value has not changed, the insulation is not damaged, the brush bristles are not shortened, the contact surface of the carbon brush is not discolored, and the armature structure is not deformed. 3. Based on the test results, if problems are found with the starter armature, a new armature should be replaced promptly to ensure that the car can start normally, avoid engine damage, and prevent unnecessary repair costs. II. Starter armature maintenance 1. Regularly check the starter armature, especially after the car has been parked for a long time. Check the armature status promptly, and replace it with a new one if there are any abnormalities. 2. When the car is running, regularly check the engine

03-01

2023

Get to know brushless DC motor stators and rotors in one minute

The stator and rotor of a brushless motor are components of the motor. The two components can coordinate with each other through the action of the magnetic coil to convert electromagnetic energy information into mechanical energy. Simply put, the stator and rotor of a brushless motor are the rotating parts of the motor. Brushless DC motors use semiconductor switching devices to achieve electronic commutation, i.e., electronic switching devices replace traditional contact commutators and brushes. They have advantages such as high reliability, no commutation sparks, and low mechanical noise, and are widely used in high-end tape recorders, video recorders, electronic instruments, and automated office equipment. A brushless DC motor consists of a permanent magnet rotor, a multi-pole winding stator, and a position sensor. The position sensor detects the change in rotor position and switches the current in the stator windings in a certain order (i.e., it detects the position of the rotor magnetic pole relative to the stator windings and generates a position sensing signal at a specific position. After processing by the signal conversion circuit, it controls the power switching circuit and switches the winding current according to a certain logical relationship). The working voltage of the stator winding is provided by the electronic switching circuit controlled by the position sensor output. There are three types of brushless motor stator and rotor position sensors: photoelectric, magnetoresistive, and electromagnetic. In brushless DC motors using magnetoresistive position sensors, the magnetoresistive sensor components (

02-20

2023

How to check the condition of a brushless motor stator and rotor?

The stator and rotor of a brushless motor are important components of motors such as generators and starters. The stator is an important part of the motor. The stator and rotor of a brushless motor consist of a stator core, stator windings, and a frame. The main function of the brushless motor stator and rotor is to generate a rotating magnetic field, while the main function of the rotor is to be cut by electromagnetic lines in the rotating magnetic field to generate (output) current. The rotor is the rotating part of the motor. The motor consists of a rotor and a stator, used to achieve the conversion of electrical energy and mechanical energy, as well as mechanical energy and energy conversion devices. The motor rotor system is divided into two motor rotors and generator rotors. The function of the brushless motor stator and rotor is to rotate the drive shaft and provide electrical energy and mechanical energy conversion. The stator refers to the conductor in the magnetic field, the conductor is fixed, and the rotor refers to the electromagnetic coil, which moves relative to the conductor. This relative motion causes the magnetic lines of force to be cut, thus generating current in the stator coil. The stator and rotor of a brushless motor are made of iron cores and windings, and the windings are made of silicon steel and thick copper conductors. The conductors are insulated and coated with epoxy resin. The stator and rotor of a brushless motor are equivalent to conductors, and the rotor is equivalent to an electromagnet. After the rotor is energized, it is driven to rotate by the engine to form a rotating magnetic field model. Conversely, when the conductor cuts the rotating magnetic field, an induced electromotive force will be formed in the conductor.

< 1...101112...24 >