Specializing in the design and manufacture of automotive motor armatures and stators.

Jinzhou Hanhua welcomes ISO14001:2015 and OHSAS18001:2007 dual-system recertification audit:

Release Time：

2022-02-22

　　From July 17 to 20, 2018, TÜV SÜD China conducted a recertification audit of Hanwha Corporation's ISO14001:2015 Environmental Management System and OHSAS18001:2007 Occupational Health and Safety Management System. The four-day audit involved two auditors who, based on audit requirements, comprehensively and meticulously reviewed the planning and management of Hanwha Corporation's environmental and safety management systems, the organization's environment, risks and opportunities, assessment of environmental factors/hazards, compliance with laws, regulations and other requirements, targets and indicators, and environmental and occupational health monitoring, etc., for the past year. The auditors affirmed Hanwha Corporation's environmental and health and safety management system operations, while also suggesting areas for improvement and providing valuable management recommendations. Hanwha Corporation is actively addressing these improvement items and will continue to improve in future work. The recertification audit was successfully completed.

12-01

2022

Starter motor armature manufacturer: What are the characteristics of the armature?

Starter armature manufacturer introduction: Whether it is a DC motor or an AC motor, and regardless of whether the winding is placed on the rotor or stator, it belongs to the armature winding placed in the iron core slot. It is only because of the different connection methods of the winding that different types and characteristics are obtained. In order to strengthen the mechanical fixation of the winding, its effective (straight) part is placed in the slot. But the ending is still an invalid part, only playing a connecting role. The starter armature manufacturer believes that the winding embedded in the slot also brings some problems. First of all, in order to prevent tooth saturation, the air gap magnetic density has to be limited, which limits the utilization coefficient of the motor. Second, the voltage of the motor cannot be too high. Third, the inductance of the coil becomes larger, which is related to the saturation of the iron core. In this way, for electric drive and servo systems, the response speed of the motor becomes slower, and the nonlinearity of the inductance complicates the control system. Therefore, in the development of large steam turbine generators, especially the emergence of superconducting motors, as well as DC motors and control motors, slotless motors have appeared. The starter armature manufacturer believes that slotless DC motors are mainly used for the control of DC traction motors and small DC motors. The iron core of the slotless motor is a cylindrical yoke, which is wound with an insulating layer or fitted with a prefabricated insulating tube. Then, the winding elements are evenly distributed on its surface.

11-21

2022

Starter armature manufacturer: Common sense of armature

The starter armature manufacturer indicates that the winding is the heart of the motor. Different motors, different manufacturers, and different processing technologies will correspond to different winding types. Different winding types are selected according to the specific characteristics to be achieved, requiring simple structure, convenient manufacturing and maintenance, and safe and reliable operation. The armature winding of a DC motor is the same as that of an AC motor. The relationship between the coils should be such that a certain number of conductors produce a large potential difference, saving as much non-ferrous metal and insulating material as possible. However, it also has its unique features: the coils are connected by a commutator, and the connection relationship must ensure good commutation. The starter armature manufacturer indicates that the armature windings of DC motors can be divided into five types: single winding, lap winding, single wave winding, multiple wave winding, and frog winding, i.e., a mixed winding of lap winding and wave winding. In a single lap winding, adjacent elements under the same magnetic pole are connected in series, and the pitch y=yk=1 or -1. When winding this type of winding, any two series-connected elements directly overlap each other, so it is called a lap winding. If y=yk=1, the winding moves to the right, which is called a "right-hand" winding; if y=yk=-1, the winding moves to the left, which is called a "left-hand" winding. Each element of the left-hand winding is connected to two short lines of the commutator, using copper.

11-11

2022

Overview of Automotive Armature

In the process of electromechanical energy conversion in a motor, the automotive armature plays a key and pivotal role. For a generator, it is the component that generates electromotive force. Let's take a detailed look at the automotive armature. The automotive armature is the component in the motor that carries the coil, and the relative movement of the coil and the magnetic field. In a generator, the induced electromotive force is generated in the coil, and the coil rotates under force to generate electricity. In a motor, the energized coil is subjected to Ampere force in the magnetic field, causing it to rotate in the magnetic field. Since the automotive armature plays a very important role, you should know that in fact, part of an AC generator or related equipment can be represented in mechanical or electrical terms. Although clearly separate, note that these two sets of terms are often used interchangeably, or include a combination of mechanical and electrical terms. This can lead to confusion when using composite machines such as brushless AC generators, or when talking between people accustomed to using differently configured machines. Therefore, in most generators, the excitation magnet rotates and is part of the rotor, while the automotive armature is stationary and part of the stator. Motors and generators can be constructed with a stationary armature and rotating magnetic force or a rotating armature and stationary magnetic force. The demagnetization effect of the automotive armature can be...

< 1...13 14 15...24 >

Add：NO 2, Section 4. Bohail Avenue,Jinzhou Economic and Tchnical Development Zone, Jinzhou

Sales Department：+86 416-2933839

Http：www.jzhhdz.com

Email：hhdz_sales@163.com

Scan To Learn More

COOKIES

Our website uses cookies and similar technologies to personalize the advertising shown to you and to help you get the best experience on our website. For more information, see our Privacy & Cookie Policy

COOKIES

required

These cookies are necessary for basic functions such as payment. Standard cookies cannot be turned off and do not store any of your information.

analyze

These cookies collect information, such as how many people are using our site or which pages are popular, to help us improve the customer experience. Turning these cookies off will mean we can't collect information to improve your experience.

Feature

These cookies enable the website to provide enhanced functionality and personalization. They may be set by us or by third-party providers whose services we have added to our pages. If you do not allow these cookies, some or all of these services may not function properly.

advertise

These cookies help us understand what you are interested in so that we can show you relevant advertising on other websites. Turning these cookies off will mean we are unable to show you any personalized advertising.

Copyrights Jinzhou Hanhua Electrical Systems co., ltd. Website：300.cn jinzhou.300.cn SEO Privacy Policy

Business License